Sensor Dust & Dirt
- György
- February 16, 2021
- Photography, Video
Sensor Dust & Dirt and the role of aperture
Dirt and dust has been the enemy of photographers and filmmakers since the very beginning. Today it is a speck of dust, a fingerprint, an oily smudge or a piece of lint on the sensor of your beloved digital camera. Mirrorless systems are even more susceptible to it than DSLRs where the blades of the shutter and the mirror offer some degree of protection.
But this is nothing new. Shooting films on celluloid made DPs very much aware of the aesthetic destruction dust and dirt can cause at any stage of filming.
The above 1-minute excerpt is from a documentary I shot on 16mm film.
Excerpt from ‘History of a Pellet‘, Directed by Tomas Potocny.
Sensor dirt - getting suspicious
The images were shot on a sunny winter day on my Fujifilm X-T3 with a 23mm, f/1.4 lens. Which is completely irrelevant. All digital cameras struggle with smudges on the sensor. And mirrorless cameras struggle even more – every lens change exposes the bare sensor to the elements.
I first got suspicious looking at the image in Lightroom. Looking at the image below I thought I saw some strange shadows on the snow. But I wasn’t certain. Jumping to the next image made it all clear. Same camera setting, same smudge – different photo. That can only mean dirt on the sensor.
Unedited
Dehaze / Clarity
Move the slider left and right to see how what you might perceive from the corner of your eye as a faint shadow becomes a “HugE” piece of obvious dirt on your camera’s sensor
To confirm my suspicion I increased the clarity and the dehaze filters to 100% in Lightroom. To make it clear: this was a diagnostic decision, not an editing one. And it did prove that indeed, my sensor was dirty.
The Shock
Little did I know just how much dirt I had on the sensor. It is very important to realise that depth-of-field works both in front of and behind the lens. A tiny piece of fluff is blurred out of existence when you shoot at apertures below f/5.6 – f/4. At f/2.8 or f/2 you will never ever notice it.
The spots show up especially for landscape photographers who shoot a lot at small apertures like f/16 or f/22. The smudges start taking shape especially against non-textured, smooth, bright backgrounds – most often the sky. Or, in this case, against the snow.
So that I would see all the dirt I shot a series of quick tests. I pointed the camera at a white wall, put the camera on aperture priority and ISO 160 (the lowest on my Fujifilm X-T3) and shot a series all the way from f/16 to f/1.4.
The image shot at f/16 was a most unpleasant revelation.
ISO 160, f/16
ISO 160, f/2.8
Move the slider left and right to see how the huge smudges impossible to miss at f/16 are all but invisible at f/2.8
While I was there, I also shot a series at ISO 6400 just to be able to observe the effect of noise on the shape and size of the sensor dirt.
ISO 160, f/16
ISO 6400, f/16
Move the slider left and right to see what noise does to the dirt.
conclusion
I learned that my sensor is extremely dirty and the camera is ready to be serviced by a qualified technician. (I am not going to touch the sensor!)
You can test your camera in exactly the same way!
And should you find that your sensor is dirty do not panic. Just keep in mind that aperture influences depth-of-field also in the back of the lens.
Small apertures (typically f/11 and smaller) will render dirt and dust more visible.
Large apertures (typically f/4 and larger) will blur dirt and dust beyond visibility.
Below is the video taking you through the entire process step-by-step.
